|
Home | Profile |
|
|
 |
 |
EH SeriesHome > Lathe Machines » EH Series |
JP brand Roll Turning Lathe Machin are intended for wide variety of application such as oil country, steel & paper mills, power plants, ship building, mining and textile industries.
These rugged machines are designed to provide the precision you expect and rigidity and reliability required by modern demanding application as stated above and it is also useful for production oriented users. High chip cutting power, Precision and universality are the featured characteristics of EH-Series Lathes
Mega bores, Mega face plates, Mega chucks for massive jobs, unique closed type thread box with efficiency to cut mm/inch threads in wide variety.
Extra heavy duty main slide to perform massive jobs with higher efficiency and effectively. X-Z rapid system enables user friendly atmosphere and less worker fatigue precision guide ways with close matching to provide great endurance user friendly front control.
| Centre height | Swing | Centre distance | Spindle bore | Speed range | Threads |
| 500mm to 1500 mm / 20” to 60” | 1000mm to 3000mm / 40” to 120” | 3000mm to 20000mm / 120” to 780” | 125mm to 625mm / 5” to 25” | 1 to 1000 Rpm | Metric-Module-Diametric-Whitworth |
Fast Facts | Standard Features |
| Heavily ribbed single piece bed which is hardened and precision ground. | Quick change gear box for inch & metric threads. |
| Extra wide, vibration free gray cast iron machine structure. | Removable Gap |
| Dynamically balanced components. | Steady Rest. |
| Quick change gearbox for cutting Metric-Module-Diametric-Whitworth Threads and most of them can be cut without changing gears. | Follow Rest |
| Fully geared headstock provides a wide range of spindle speeds. | Chuck guard |
| Adjustable long life precision taper roller bearing for spindle. | Coolant System. |
| High chip cutting power with accuracy and stability. | Thread Dial |
| All gears are hardened & ground for quiet operations. | Centralized Lubrication System |
| Rapid system for saddle and tail stock | Tool box |
| Large safety hand wheels with easily legible scales. | Test chart and high endurance certificate |
| Wide range of spindle speed to choose from (1-1000 Rpm) | Instruction and maintenance manual |
| Optional Features | |
| Quick change tool post | Front & rear 4 jaw chuck |
| Quick change gear box for Metric-Module-Diametric-Whitworth Threads | Machine brake |
| 3-Jaw chuck | Ball screw for cross traverse |
| Face plate | Tool post protection |
| Electronic DRO | Twin saddle |
| Two speed tails stock. | Specific speed range |
| 4 way rapid traverse | Specific motor HP |
| Auto movement of tailstock | Specific spindle bore |
| Hydraulic tracer | Specific gap length |
| Taper turning attachment | Additional steady rest |
| Key cutting attachment | Revolving centre |
| Tool post grinder attachment |
| Model | JP-L160EH | JP-L161EH | JP-L162EH | JP-L163EH | JP-L180EH | JP-L181EH | JP-L182EH | JP-L183EH | JP-L200EH | JP-L300EH | JP-L400EH | JP-L500EH | JP-L600EH | |
| Height of Centre | mm | 500mm | 550mm | 600mm | 650mm | 700mm | 750mm | 800mm | 900mm | 1000mm | 1100mm | 1200mm | 1350mm | 1500mm |
| inch | 20" | 22" | 24" | 26" | 28" | 30" | 32" | 36" | 40" | 44" | 48" | 54" | 60" | |
| Distance between Centre | mm | 3000mm/120" , 4000mm/160" ,5000mm/200" ,6000mm/240" ,7000mm/280" ,8000mm/320" ,9000mm/340" ,10000mm/380" , 11000mm/420" ,12000mm/460" ,13000mm/500" | ||||||||||||
| inch | 14000mm/540" ,15000mm/580" ,16000mm/620", 17000mm/660" , 18000mm/700" ,19000mm/740" ,20000mm/780" | |||||||||||||
| Swing over Bed | mm | 1000mm | 1100mm | 1200mm | 1300mm | 1400mm | 1500mm | 1600mm | 1800mm | 2000mm | 2200mm | 2400mm | 2700mm | 3000mm |
| inch | 40" | 44" | 48" | 52" | 56" | 60" | 64" | 72" | 80" | 88" | 96" | 108" | 120" | |
| Swing in Gas | mm | 1600mm | 1700mm | 1800mm | 1900mm | 2000mm | 2100mm | 2200mm | 2400mm | 2600mm | 2800mm | 3000mm | 3300mm | 3600mm |
| inch | 64" | 68" | 72" | 76" | 80" | 84" | 88" | 96" | 104" | 112" | 120" | 132" | 144" | |
| Swing over Cross Slide | mm | 650mm | 750mm | 800mm | 850mm | 1000mm | 1100mm | 1200mm | 1400mm | 1550mm | 1750 | 1950mm | 2150mm | 2350mm |
| inch | 26" | 30" | 32" | 34" | 40" | 44" | 48" | 56" | 62" | 70" | 78" | 86" | 94" | |
| Width of Bed | mm | 550mm | 650mm | 700mm | 750mm | 800mm | 850mm | 900mm | 1000mm | 1100mm | 1200mm | 1350mm | 1500mm | 1625mm |
| inch | 22" | 26" | 28" | 30" | 32" | 34" | 36" | 40" | 44" | 48" | 54" | 60" | 65" | |
| Hole through Spindle | mm | 127mm | 127mm | 127mm | 127mm | 153mm | 153mm | 153mm | 153mm | 153mm | 153mm | 153mm | 153mm | 153mm |
| inch | 5" | 5" | 5" | 5" | 6" | 6" | 6" | 6" | 6" | 6" | 6" | 6" | 6" | |
| Range of Spindle Speeds Selection | 1-1000 Rpm | |||||||||||||
| Whitworth Threads | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | 48 , 1-16 | |
| Metric Threads | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | 48, 2-30 | |
| Cross Slide Travel | mm | 550mm | 650mm | 700mm | 750mm | 800mm | 850mm | 900mm | 1000mm | 1100mm | 1200mm | 1350mm | 1500mm | 1625mm |
| inch | 22" | 26" | 28" | 30" | 32" | 34" | 36" | 40" | 44" | 48" | 54" | 60" | 65" | |
| Top Slide Travel | mm | 250mm | 250mm | 250mm | 250mm | 250mm | 250mm | 250mm | 250mm | 300mm | 300mm | 300mm | 300mm | 300mm |
| inch | 10" | 10" | 10" | 10" | 10" | 10" | 10" | 10" | 12" | 12" | 12" | 12" | 12" | |
| Morse Taper of Sleeve | MT5 | MT5 | MT5 | MT5 | MT5 | MT6 | MT6 | MT6 | MT6 | MT6 | MT6 | MT6 | MT6 | |
| Main Power | 10 HP | 10 HP | 10 HP | 10 HP | 15HP | 15HP | 15HP | 15HP | 20 HP | 30HP | 40HP | 50HP | 50HP | |
| Lubrication Power | .5HP | .5HP | .5HP | .5HP | 1HP | 1HP | 1HP | 1HP | 1HP | 1HP | 1HP | 1HP | 1HP | |
| Rapid Power | 1HP | 1HP | 1HP | 1HP | 2HP | 2HP | 2HP | 2HP | 3HP | 3HP | 3HP | 3HP | 3HP | |
| Tailstock Power | .75HP | .75HP | .75HP | .75HP | 1HP | 1HP | 1HP | 1HP | 2HP | 2HP | 2HP | 3HP | 3HP | |