JP Brand Tool room lathes are combination of accuracy, simplicity and affordability to its users. H-Series lathe have just the right amount of engineering to afford simplicity of operation, coupled with plain and simple rugged reliability.
JP Brand H-Series Tool room Lathes comes with a package of features which make the machine to perform even the most complex turning operation with higher level of accuracy and rigidity.
| Centre height | Centre distance | Spindle bore | Speed range | Threads |
| 175mm to 480 mm | 750mm to 4000mm | 50mm to 250mm |
35 to 2000 Rpm | Metric-Module-Diametric-Whitworth |
| Fast Facts | Standard Features |
| Heavily ribbed single piece bed which is hardened and precision ground | Thread dials |
| Extra wide bed ways for rigidity and stability in operation | Steady rest |
| Dynamically balanced components | Follow rest |
| Quick change gearbox for cutting Metric-Module-Diametric-Whitworth Threads and most of them can be cut without changing gears | Chuck guard |
| Fully geared headstock provides a wide range of spindle speeds | Removable gap |
| Spindle is mounted on a set of precision angular taper bearings | Work light |
| High chip cutting power with accuracy and stability makes it a complete solution for tool room turning problems | Splash guard |
| Tool box |
| Test chart and high endurance certificate |
| Instruction and maintenance manual |
| Optional Features | |
| Quick change tool post | Coolant system |
| 4-Jaw chuck | Forced lubrication |
| 3-Jaw chuck | Ball screw for cross traverse |
| Face plate | Rear chuck |
| Electronic DRO | Tool post protection |
| Hydraulic tracer | Twin saddle |
| Taper turning attachment | Auto movement of tailstock |
| Key cutting attachment | Specific speed range |
| Tool post grinder attachment | Specific speed range |
| 4-Way rapid traverse system | Additional steady rest |
| Foot brake | Revolving centre |
|
Model |
JP-L46 |
JP-L56 |
JP-L66H |
JP-L86H |
JP-L100H |
JP-L120H |
|
Height of Centre |
175mm/ 7" |
215mm/ 8.6" |
300mm/ 12" |
350mm/ 14" |
400mm/16" |
450mm/ 18" |
|
Distance between Centre |
750mm/ 30" , 1000mm/ 40" , 1500mm/
60" , 2000mm/ 80" , 2500mm/ 100" ,
3000mm/ 120" , 3500mm/ 140" ,
4000mm/160" |
|
Swing over Bed |
350mm/ 14" |
430mm/17" |
600mm/24" |
700mm/28" |
800mm/32" |
900mm/36" |
|
Swing in Gap |
510mm/20" |
580mm/23" |
725mm/29" |
825mm/33" |
925mm/37" |
1025mm/41" |
|
Swing over Cross Slide |
230mm/ 9" |
250mm/ 10" |
350mm/ 14" |
400mm/16" |
450mm/ 18" |
500mm/ 20" |
|
Width of Bed |
240mm/9.6" |
300mm/12" |
350mm/ 14" |
400mm/16" |
450mm/ 18" |
500mm/20" |
|
Hole through Spindle |
40mm |
53mm |
80mm |
105mm |
127mm |
127mm |
|
No. Spindle Speeds
|
8, 54-1200 |
12, 25-1025 |
16, 35-2000 |
16, 35-2000 |
20, 35-2000 |
24, 35-2000 |
|
Whitworth Threads |
32, 4-60 |
32, 4-60 |
32, 4-60 |
32, 4-60 |
32, 4-60 |
32, 4-60 |
|
Metric Threads |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
|
Cross Slide Travel |
255mm/ 10" |
300mm/ 12" |
400mm/ 16" |
450mm/18" |
500mm/ 20" |
550mm/ 22" |
|
Top Slide Travel |
75MM/ 3" |
125MM/ 5" |
175mm/7" |
175mm/7" |
175mm/7" |
175mm/7" |
|
Morse Taper of Sleeve |
MT3 |
MT4 |
MT4 |
MT5 |
MT5 |
MT5 |
|
Power |
2 HP |
3 HP |
3 HP |
5 HP |
5 HP |
7.5 HP |
